info@hawkwaterlesscoolants.com
Technical Helpline: 01792 572299
For vehicles working through winter or placed in storage until spring, these requirements make coolant selection an important part of yearly maintenance.
Hawk Waterless Coolants offer a different approach to conventional water and antifreeze mixtures. Hawk’s range of waterless coolants provide ultimate engine protection with a freeze point below -40°C and a boiling point above 180°C, combining cold weather protection with a substantial margin against boiling.
What happens when an inadequately protected cooling system freezes?
Water expands as it freezes. Inside the confined passages of an engine or radiator, that expansion can generate enough force to split radiator tubes, damage housings or crack engine castings.
Conventional coolants prevent this by mixing water with antifreeze, usually based on a glycol formulation. Their freeze protection depends on the concentration of that mixture. Repeatedly topping up with plain water dilutes the antifreeze and can leave the system less protected than expected.
Waterless coolant incorporates antifreeze protection in the coolant formulation, without requiring the addition of an extra antifreeze fluid or product, providing advanced technological temperature protection to -40°C. Hawk has a protection period of up to 20 years, plus does not require routine coolant replacement. Correct conversion remains essential, because residual water weakens the properties and effectiveness of the waterless coolant solution.
Freeze protection and corrosion protection are different
A coolant can retain adequate antifreeze protection while its corrosion protection deteriorates. In conventional coolant, the glycol provides freeze protection, while a separate additive package protects the metals inside the cooling system. These corrosion inhibitors gradually become depleted or less effective, which is one reason traditional coolant requires regular replacement. A satisfactory freeze-point reading alone does not establish that the coolant remains fit for service.
This distinction matters for vehicles in winter storage. Switching off the engine stops heat production, but it does not remove the coolant’s contact with radiators, cylinder heads, water pumps and other internal components.
Waterless formulations change the chemical environment in which those components operate. Hawk combines a non-aqueous base fluid with a dedicated inhibitor package, designed to prevent water-related corrosion. Removing the need for dilution water also avoids introducing the dissolved minerals that can contribute to scale formation.
Why boiling resistance still matters in winter
Cold outside air does not mean that every part of an operating engine stays cool. Combustion continues to generate intense heat, particularly around the cylinder head and exhaust-valve areas. Sustained loads, towing and demanding commercial operation in HGV’s and commercial delivery fleet vehicles can place substantial demands on the cooling system in any season. If coolant boils locally, persistent vapour pockets can interrupt liquid contact with hot metal surfaces and impair heat removal.
Hawk’s boiling-point specification is therefore relevant throughout the year. However, boiling resistance and cooling capacity are different properties: the coolant must still circulate effectively, and the radiator must reject sufficient heat. A high boiling point cannot compensate for a failed pump, restricted radiator or inadequate airflow.
Long service life still requires routine inspection
Hawk Waterless Coolants provide up to 20 years of protection without the need for coolant replacement, this alone offers the potential to reduce scheduled coolant changes. It does not remove the need to inspect coolant levels, leaks, hoses, seals and the rest of the cooling system.
Conversion quality is central to achieving the intended benefits. The existing coolant must be drained and residual water removed using the specified preparation procedure combined with Hawk Prep Fluid. Hawk recommends a residual water content no higher than 3%, making water-content verification an important part of conversion.
A coolant range matched to the vehicles you operate
The reasons for considering waterless coolant vary between vehicles. For a cherished classic, preserving original components may be the priority. For a working fleet, the attraction may be longer coolant service life and fewer scheduled replacements. Hawk’s range provides formulations for these different applications.
Classic and vintage cars - protecting components that are difficult to replace
Older engines often combine cast iron, steel, copper, brass and aluminium, making coolant compatibility particularly important. Vintage Cool 180° is formulated for older engines with pre-nodular cast iron and substantial copper and brass content, while Classic Cool 180° caters for classic engines using cast iron, steel, copper and aluminium.
For owners considering conversion, the principal attraction is component preservation. Hawk’s waterless formulations are designed to limit water-related corrosion, while their lower vapour pressure can reduce strain on ageing hoses, seals and radiator joints. That makes them relevant to vehicles whose original cooling components may be expensive or difficult to replace.
Modern passenger cars - reducing frequent coolant replacement
For drivers planning to keep their vehicle for many years, Auto Cool 180° offers the potential to reduce routine coolant changes, providing up to 20 years without replacement. The practical attraction is fewer scheduled drain and refill operations, alongside protection against freezing, boilover and water-related corrosion
Performance cars - a greater margin against boiling under load
For high performance engines and racing cars, Power Cool 180° provides a boiling point above 180°C. This gives additional margin against local boiling when engine loads and temperatures rise. For vehicles used in demanding driving conditions, such as track and off-road racing, the benefit is greater resistance to vapour formation, pre-ignition and boilover resulting in improved overall performance.
Motorcycles - protection for road use, track racing and demanding off-road racing
Hawk offers PowerSports R for liquid-cooled road and race motorcycles, and PowerSports for motocross, trials, enduro and quad bikes. Their high boiling points provide additional resistance to boilover and pre-ignition, when engines work hard with limited cooling airflow. Freeze protection below -40°C also supports winter use and seasonal storage, without adding separate antifreeze. Used and highly recommended by Honda Racing.
Delivery vans and light commercial vehicles - less scheduled maintenance for high vehicle usage
For delivery operators, time spent changing coolant is time a vehicle is unavailable for work, resulting in a loss of operational time. Hawk’s long-life waterless coolant offers the potential to reduce scheduled coolant replacement and the labour associated with it. Providing a more efficient engine performance and ultimate engine protection in all weathers.
Lorries and HGVs - liquid solution to cavitation erosion in working diesel engines
Hawk Heavy Duty is designed for commercial diesel applications. One relevant benefit is reduced susceptibility to cavitation erosion: damage caused when vapour bubbles form and collapse against metal surfaces, potentially pitting cylinder liners and pump components. Hawk provides protection against cavitation erosion, making this a consideration for engines operating for long hours under loads.
Bus and coach fleets - reducing coolant servicing across the fleet
For suitable bus and coach engines, Hawk Heavy Duty combines extended coolant service life with resistance to boiling and water-related corrosion. Across a fleet, fewer scheduled coolant replacements could reduce workshop labour, replacement-fluid use and waste coolant handling, resulting in potential operational savings.
Agricultural and plant machinery - protection through working periods and downtime
Tractors, construction plants and generators may alternate between sustained workloads and extended periods out of service. Hawk Heavy Duty provides freeze protection below -40°C for exposed equipment, together with a high boiling point for demanding operation. Its waterless formulation also targets water-related corrosion, giving operators a reason to consider conversion where preserving internal cooling system components is a priority.
Find the right formulation for your engine